Product Features：
Operating Voltage Range: 9 to 28VDC Volts Non-polarized
Standby Current: 60μA @ 24 VDC
Installation Temperatures: -10°C to50°C
Operating Humidity Range: ≤95%RH(40°C±2°C) Relative Humidity, Non-condensing
Maximum Alarm Current (LED on: ) ≤ 30mA @ 24 VDC
Fixed Temperature Rating: 57°C
Height: 48mm installed in Base
Diameter: 99mm
Weight: 155g
AS-HD105 Heat detectors are photo-electronic detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm panel.
Two LEDs on each detector provide local 360° visible alarm indication. They flash every six seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. The alarm can be reset only by a momentary power interruption.
The detector that initiated the alarm condition will have its red LED and relays latched until reset by panel.
Heat detector and smoke & heat detector combine a photo electronic sensing chamber and a temperature heat detector.
Mitra Fire bergerak di bidang proteksi kebakaran yang telah melayani instalasi dan menjadi authorize dari beberapa brand terbaik untuk sistem alarm kebakaran selama lebih dari 20 tahun
Rangkaian produk kami bahkan meluas ke alat pemadam kebakaran, Sistem kontrol, sistem AOV, dan banyak lagi. Berbagai macam produk yang berkualitas dan sangat membantu untuk pelanggan menemukan semua yang mereka butuhkan di satu situs web
0821 1144 8066
cs@mitrafire.com
Jl. Grand Duta Kota Tangerang Banten Indonesia
