The AW-CFP2166 1 Zone series conventional fire alarm panel is designed based on EN54 part 2＆4 standard. It is the heart of the fire automatic alarm system, which can realize centralized control, can supply power to the detectors, manual call point, bell etc.
| AC INPUT | 220VAC 50/60Hz | +10% |
| -15% | ||
| DC OUTPUT | 24VDC typical | |
| Voltage for MCU | 5V | |
| Current @ 220VAC | standby current ≤250mA | |
| Maximum current | 1A | |
| Batteries current | 750mA maximum, current limited | |
| Batteries | 2*12V/ 2.3Ah sealed lead acid gel, self-regulated | |
| Battery low-voltage protection | 22.2V | |
| The maximum and minimum electrical ratings for each input and output | Detectots / zone lines: 21V-26V Sounder1 and sounder2 lines:21-26.2V Fire protection/Fire routing/Fault routing lines:21-26.2V |
|
| Max points (detector and MCP) per CIE | 20 detectors and 10 MCPs | |
| Zone alarm current | 6mA minimum/ 27mA maximum | |
| Sounder output | 2*0.3A maximum | |
| Relay contacts rating | Dry contacts (NO/NC) 1A @24VDC | |
| EOL resistor for zone and outputs | 6.8K 1W | |
| Fuse on EMI board | 2A/ 250V Ceramic slow blow fuse 5*20(mm) | |
| Environmental | Class A temperature range: -5 to 40°C (23~104°F) Humidity: 5 to 95% RH, non-condensing |
|
| Terminal blocks rating | All terminals rated for 12 to18 AWG (0.75 to 2.5 mm2) | |
| Service life | 10 years | |
Mitra Fire bergerak di bidang proteksi kebakaran yang telah melayani instalasi dan menjadi authorize dari beberapa brand terbaik untuk sistem alarm kebakaran selama lebih dari 20 tahun
Rangkaian produk kami bahkan meluas ke alat pemadam kebakaran, Sistem kontrol, sistem AOV, dan banyak lagi. Berbagai macam produk yang berkualitas dan sangat membantu untuk pelanggan menemukan semua yang mereka butuhkan di satu situs web
0821 1144 8066
cs@mitrafire.com
Jl. Grand Duta Kota Tangerang Banten Indonesia
