RE-517 RP

SPECIAL FEATURES

  • 32 bit processor
  • 160 (40X4) character LCD Display
  • Event Storage with Real Time Clock
  • RS 485 communication for Network / Repeater
  • One Programmable form C relay for fire
  • Extensive built in transient protection
  • Lamp test facility
  • Common fire, supervisory, fault LED indication

Electrical Specification

Primary Power : 120 / 220VAC + 10% -15%, 60 / 50 Hz, 2 Amps.
Standby Power : 24V D.C (2 Nos of 12v, 7Ah (Max.) Sealed Lead acid battery)
Operating Condition
Operating Temperature : 0 – 49° C/32-120° F.
Relative Humidity : 93 ± 2% RH (non-condensing) at 32 ±2° C/90 ±3° F.
Charging Circuit
Charging Voltage : 28V ± 0.2V Nominal
Charging Current : 0.8A (Max.).
Notification Appliance Circuits
No of circuits : 1
Wiring Style : Class B, Style – Y wiring
Operating Nominal Voltage : 24 VDC Nominal
Current for NACs : 1 Amps
Line Drop : 2.4V
End-Of-Line Resistor : 4K7, ½ watt
Relays
Type : Form C
No of Relays : 1
Relay Contact Rating : 2A @ 30 VDC, 2A @ 30VAC.

Mechanical Specification

Dimensions : (350W X 400H X 90D) mm
Color : White / Red / Black
Construction : 16 gauge (1.6mm) CRCA sheet with powder-coated finish
IP Rating : IP50
Cable Entry : 8xø19mm Knockout at the top of the cabinet
Weight : 6 Kg

Dimensions

Compatible Devices

MODEL DESCRIPTION
Avani Analogue Addressable Fire Alarm Panel

Ordering Information

MODEL Description
RE-517RP-W/R/B Analogue Addressable Repeater Panel

Note :

* By default Repeater panel is designed for Wall mounting only.

* If Specified Repeater panel will be designed for Flush Mounting.

* W – White Color ; R – Red Color ; B – Black Color

WIRING DIAGRAM

Mounting Diagram

Peer to Peer Network

IP Based Network

IP Based Network

Terminal Network

The RE-517RP repeater panel is a compact remote unit for Ravel-Avani Intelligent Analogue Addressable fire Alarm panel. This repeater is an active repeater with full indication and controls of main FACP. This repeater is connected to Avani FACP using RS485 communication network. Any communication fault or any loss in communication due to cable fault is indicated in this repeater panel. The display parameters can be selected individually to suit the requirement of each remote area.

Related products